LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (34 - Mechanical Gear-Shift System - Actuation, Housing -- 987-BOXSTER-CAYMAN) >> WM 344019 Removing And Installing Transmission Mount (All Models) >> Installing Transmission Mount

Installing Transmission Mount

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit gear support -3-  with hydraulic mounts.
  2. Screw on M8 nuts -1-  on hydraulic mounts and secure with M10 screws -2-  (a/f 16) on gear support -2-  .

    → Tightening torque: 65 Nm (48 ftlb.) → Tightening torque: 33 Nm (24 ftlb.) 

    Fig 1: Identifying Gear Supports With Left And Right Hydraulic Mounts
    G09586711Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals