Removing Transmission Housing
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
| No. | Designation | Qty. | Removal |
|---|---|---|---|
| 1 | Torx screw | 3 | Already removed during preliminary work. |
| 2 | Guide sleeve | 1 | Already removed during preliminary work. |
| 3 | O-ring | 1 | Already removed during preliminary work. |
| 4 | Shaft seal | 1 | Already removed during preliminary work. |
| 5 | Cup spring | 1 | |
| 6 | Circlip | 1 | Note the thickness for re-installation (must not be interchanged). |
| 7 | Ball bearing | 1 | Pull out with puller v.a.g. 1582 and grip piece v.a.g.1582/2 . |
| 8 | Circlip | 1 | Note the thickness for re-installation (must not be interchanged). |
| 9 | Hexagon-head bolt | 1 | |
| 10 | Tab washer | 1 | |
| 11 | Reversing-light switch | 1 | |
| 12 | O-ring | 1 | |
| 13 | Torx screw | 1 |