Fitting Transmission Cover
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
| No. | Designation | Qty. | Fitting |
|---|---|---|---|
| 14 | Torx screw | 14 | → Tightening torque: 25 Nm (19 ftlb.) |
| 15 | Transmission cover | 1 | Apply sealing material Loctite 574 to the contact surfaces and tighten Torx screws -14- . |
| 16 | Torx screw | 1 | → Tightening torque: 40 Nm (30 ftlb.) |
| 17 | Spacer | 1 | |
| 18 | Torx screw | 1 | → Tightening torque: 40 Nm (30 ftlb.) |
| 19 | Spacer | 1 | |
| 20 | Torx screw with collar | 1 | → Tightening torque: 25 Nm (19 ftlb.) |
| 21 | Switch interlock | 1 | |
| 22 | Drive shaft | 1 | |
| 23 | Output shaft | 1 | |
| 24 | Relay shaft | 1 | |
| 25 | Shift rod and shift fork for 3rd and 4th gear | 1 | |
| 26 | Interior shift rod | 1 | |
| 27 | Shift rod with shift fork for 1st, 2nd, 5th, and reverse gear | 1 | Only replace shift rod for 5th and reverse gear complete with shift fork and driver. |