Fitting Accessories

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.

Fit mount for exhaust system on transmission.

Fig 1: Identifying Exhaust System Mounting Bolts

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Exhaust system mount	Fastening screws between transmission housing mount	Tightening torque	45 Nm (33 ftlb.)

Push on electric connector for reverse gear switch.

Fig 2: Locating Reversing Light Switch
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

Before installing the clutch slave cylinder, grease the push rod with Kluberalfa in the area of the release-lever ball socket. Part No. 000.043.304.02 (50g tube).

Insert clutch slave cylinder in transmission opening and screw in fastening screw.

Fig 3: Locating Clutch Slave Cylinder Screw

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Clutch slave cylinder	Fastening screws between transmission housing and clutch slave cylinder	Tightening torque	23 Nm (17 ftlb.)

Fit the external shift mechanism and tighten nut.

Fig 4: Locating External Shift Mechanism Fastening Nut

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
External shift mechanism	Fastening nut between shifting shaft and external shift mechanism	Tightening torque	23 Nm (17 ftlb.)