Technical Values
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Transmission/engine connection | Hexagon-head bolt no. 1 in figure, M12 x 70 | Tightening torque | 85 Nm (63 ftlb.) | ||
| Transmission/engine connection | Hexagon-head bolt no. 2 in figure M12 x 100; with washer | Tightening torque | 85 Nm (63 ftlb.) | ||
| Transmission/engine connection | Hexagon-head bolt no. 3 in figure, M12 x 100 | Tightening torque | 85 Nm (63 ftlb.) | ||
| Transmission/engine connection | Internal-serration screw no. 4 in figure M10 x 40 | Tightening torque | 45 Nm (33 ftlb.) | ||
| Transmission/engine connection | Hexagon-head bolt no. 5 in figure M12 x 70 | Tightening torque | 85 Nm (63 ftlb.) | ||
| Transmission/engine connection | Nut no. 6 in figure M10 | Tightening torque | 45 Nm (33 ftlb.) | ||
| Transmission/engine connection | Hexagon-head bolt no. 7 in figure M12 x 90 | Tightening torque | 85 Nm (63 ftlb.) | ||
| Transmission/engine connection | Hexagon-head bolt no. 8 in figure M12 x 90 | Tightening torque | 85 Nm (63 ftlb.) | ||
| Clutch slave cylinder | Fastening screws between transmission housing and clutch slave cylinder | Tightening torque | 23 Nm (17 ftlb.) | ||
| External shift mechanism | Fastening nut between shifting shaft and external shifting mechanism | Tightening torque | 23 Nm (17 ftlb.) | ||
| Transmission support | Fastening screws between transmission support and transmission | Tightening torque | 65 Nm (48 ftlb.) | ||
| Hydraulic mount | Fastening screws between hydraulic mount and body | Tightening torque | 33 Nm (24 ftlb.) | ||
| Cross member | Fastening screws between cross member and body | Tightening torque | 65 Nm (48 ftlb.) | ||
| Drive shafts | Fastening screws between drive shaft and transmission flange | Tightening torque | 60 ftlb. | ||
| Anti-roll bar | Fastening screws between anti-roll bar and rear axle carrier side member | Tightening torque | 17 ftlb. | ||
| Restraining cable | Fastening nut between restraining cable and cross member | Tightening torque | 23 Nm (17 ftlb.) |