Technical Values

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.

Location	Description	Type	Basic value
Transmission/engine connection	Hexagon-head bolt no. 1 in illustration, M12 x 70	Tightening torque	85 Nm (63 ftlb.)
Transmission/engine connection	Hexagon-head bolt no. 2 in illustration, M12 x 100; with washer	Tightening torque	85 Nm (63 ftlb.)
Transmission-engine connection	Hexagon bolt No. 3 M12 x 90 in illustration	Tightening torque	85 Nm (63 ftlb.)
Transmission-engine connection	Internal serration screw No. 4 M10 x 35 in illustration	Tightening torque	45 Nm (33 ftlb.)
Transmission-engine connection	Nut No. 5 M10 in illustration	Tightening torque	45 Nm (33 ftlb)
Transmission/engine connection	Hexagon-head bolt no. 6 in illustration, M12 x 90	Tightening torque	85 Nm (63 ftlb.)
Transmission-engine connection	Hexagon bolt No. 7 M12 x 90 in illustration	Tightening torque	85 Nm (63 ftlb.)
Clutch slave cylinder	Fastening screw between transmission housing and clutch slave cylinder	Tightening torque	23 Nm (17 ftlb.)
Transmission support	Fastening screws between transmission support and transmission	Tightening torque	65 Nm (43 ftlb.)
Hydraulic mount	Fastening screws between hydraulic mount and body	Tightening torque	33 Nm (24 ftlb.)
Cross member	Fastening screws between cross member and body	Tightening torque	65 Nm (48 ftlb.)
Drive shafts	Fastening screws between drive shaft and transmission flange	Tightening torque	81 Nm (60 ftlb.)
Anti-roll bar	Fastening screws between anti-roll bar and rear axle carrier side member	Tightening torque	23 Nm (17 ftlb.)
Restraining cable	Fastening nut between restraining cable and cross member	Tightening torque	23 Nm (17 ftlb.)