Technical Values
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Position of unit lifting platform with respect to engine | Adjustment value | 10° | |||
| Screws securing transmission to engine housing | M12 x 55 | Tightening torque | 85 Nm (63 ftlb.) | ||
| Screw for clutch slave cylinder | M8 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Nut on external shift mechanism | M8 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Transmission bracket to manual transmission | M10 x 1.5 - do not grease. | Tightening torque | 65 Nm (48 ftlb.) | ||
| Hydraulic mount to rear-axle carrier side section | M8 - do not grease. | Tightening torque | 23 Nm (17 ftlb.) | ||
| Anti-roll bar to side section | M8 x 40 - do not grease. | Tightening torque | 23 Nm (17 ftlb.) | ||
| Bolts securing drive shaft to halfshaft flange | M10 | Tightening torque | 81 Nm (60 ftlb.) | ||
| Screws securing cross member to body | M10 x 72 | Tightening torque | 65 Nm (48 ftlb.) | ||
| Support plate to cross member | M10 x 1.5 - do not grease. | Tightening torque | 65 Nm (48 ftlb.) | ||
| Support plate to cross member (V-strut) | M10 x 1.5 - do not grease. | Tightening torque | 65 Nm (48 ftlb.) | ||
| Diagonal brace with support plate to carrier side section | M10 x 25 - do not grease. | Tightening torque | 65 Nm (48 ftlb.) | ||
| Diagonal brace to body | M12 - do not grease. | Tightening torque | 110 Nm (81.5 ftlb.) |