LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (34 - Mechanical Gear-Shift System - Actuation, Housing -- 987-BOXSTER-CAYMAN) >> WM 341219 Removing And Installing Shift And Selector Cables (All Models) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Locking bridge P 9619/1  must be removed.
    Fig 1: Removing Locking Bridge
    G09586662Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Install handbrake lever.

    → INSTALLING PARKING-BRAKE LEVER

  3. Install rear wall cover.

    → INSTALLING REAR WALL COVER

  4. Install engine compartment lid.

    → INSTALLING ENGINE COMPARTMENT LID

  5. Install shift lever knob.

    → Installing Shift Lever Knob 

  6. Install Centre console.

    → INSTALLING CENTRE CONSOLE

  7. Lower the vehicle.
scientia non olet · About LEMON Manuals