Installing Hall Sender

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.

Replace O-ring. Lightly grease O-ring -arrow- with Optimol MP3.

Fig 1: Locating Hall Sender O-Ring
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fit hall sender -3- by screwing in and tightening the Torx screw (M6 x 16) -2- . → Tightening torque: 7.5 ftlb.
Push on cable plug -1- .

Fig 2: View Of Hall Sender For Cylinder 1-3

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 3: View Of Hall Sender For Cylinder 4-6

Courtesy of PORSCHE CARS NORTH AMERICA, INC.