LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (24 - Fuel System - Electronic Ignition -- 987-BOXSTER-CAYMAN) >> WM 247019 Removing And Installing DME Control Unit (CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, CAYMAN R) >> Installing DME Control Unit

Installing DME Control Unit

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Plug in connectors on the DME control unit.
    1. 1.1. Push in connectors on the DME control unit -arrows-  until they engage securely.
    2. 1.2. Plug in connectors on the DME control unit -arrows-  and lock connectors with the locking mechanism.
    Fig 1: Plugging In Connectors On DME Control Unit
    G09586265Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Install DME control unit.
    1. 2.1. Place DME control unit in installation position.
    2. 2.2. Tighten fastening nuts -1-  . → Tightening torque: 10 Nm (7.5 ftlb.) 
      Fig 2: Installing DME Control Unit
      G09586266Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals