LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (24 - Fuel System - Electronic Ignition -- 987-BOXSTER-CAYMAN) >> WM 244020 Removing And Installing Fuel Injector (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER SPYDER, BOXSTER S Black Edition, CAYMAN R) >> Installing Fuel Injector

Installing Fuel Injector

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Replace O-rings -arrows-  . Lightly grease new O-rings with Optimol MP3.
    Fig 1: Locating Fuel Injector O-Rings
    G09586146Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Press fuel injector into the fuel gallery.
  3. Fit safety clips.
  4. Press fuel injectors with fuel gallery into the bores in the intake-air distributor or intake pipe support.
  5. Secure fuel gallery with two Torx screws (M6 x 12) -2-  . → Tightening torque: 7.5 ftlb. 
  6. Connect fuel injector cable plug -1-  . The plug must engage audibly.
    Fig 2: Identifying Left Fuel Gallery
    G09586147Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals