LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 10 - Engine - Crankcase, Suspension -- (981) BOXSTER/CAYMAN >> WM 105519 Removing And Installing Oil Separator (All Models) >> Removing Oil Separator

Removing Oil Separator

  1. Unscrew and remove fastening screw -4-  on the oil separator -3-  .
    Fig 1: Locating Front Oil Separator And Screws
    G10026212Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Release and pull off positive crankcase ventilation line -3-  at the oil separator.
    Fig 2: Releasing Oil Separator Positive Crankcase Ventilation Line
    G10026213Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Unscrew and remove fastening screw -1-  .
    Fig 3: Identifying Intake-Air Distributor Oil Separator Fastening Screw
    G10026214Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Carefully press positive crankcase ventilation line aside and out of the work area.
  5. Pull oil separator -1-  up off the oil bracket -arrow "A"-  and remove it -arrow "a"-  .
    Fig 4: Removing Oil Separator
    G10026215Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  6. Clean connection points and seal with stoppers.