Installing Engine Carrier

Information 

Specifications for wrench sizes (a/f specifications) for screw heads are described as follows:

• Torx screws: (E..) for external Torx, (T..) for internal Torx  .
• Hexagon-head bolts (internal and external hexagon): Wrench size (a/f) 

1. Install engine carrier with engine mount.
   1. 1.1. Position engine carrier on the engine.
   2. 1.2. Screw in and tighten four hexagon-head bolts (a/f 16, position as per component overview). Tightening Torque 65 Nm (48 ft. lbs.)