Engine Number Marking

Information 

• Do not use steel stamping numbers to mark the engine number on direct fuel injection engines  .
• Due to the material composition, the engine number must be engraved using the specified tool  .

1. Connect Compressed-Air Marking Pen Nr. 197 -1-  to compressed air supply.
   1. 1.1. Turn the adjusting ring to -arrows-  open or close the compressed air supply.
   2. 1.2. First test the tool on a piece of waste material.
      Fig 1: Turning Marking Pen Adjusting Ring (No. 197)

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Use the marking pen to engrave the engine number into the crankcase.
   Fig 2: Identifying Engine Number On Crankcase

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   1. 2.1. To provide a clear marking, use a 0.5 (5 mm) template! 
      Fig 3: Identifying Template

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.