Installing Convertible Top Covering

Secure convertible top covering at the front.
1. 1.1. Position convertible top covering -1- .
2. 1.2. Fit the corners. -arrows A-
3. 1.3. Centre convertible top covering at the front. → Aligning convertible top covering
  
  Fig 1: Securing Convertible Top Covering
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 2: Aligning Convertible Top Covering
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. 1.4. Fold the convertible top material around the edge of the roof frame without wrinkles. -arrows B-
5. 1.5. Secure the front edge with double-sided adhesive tape -2- .
  Information
  
  Check that the fold placer cord -6- is routed correctly. -arrow-
  
  Further installation is performed in reverse order to removal.
  
  Tightening torque 6 Nm (4.5 ftlb.)
  
  Tightening torque 9 Nm (6.5 ftlb.)
Fig 3: Locating Fold Placer Cord
Courtesy of PORSCHE CARS NORTH AMERICA, INC.