LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 61 - Convertible Top, Hardtop -- (981) BOXSTER >> WM 612219 Removing And Installing Seal For Cowl Panel Frame (Except CAYMAN, CAYMAN S, CAYMAN GTS) >> Removing Seal For Cowl Panel Frame

Removing Seal For Cowl Panel Frame

Fig 1: Identifying Cowl Panel Frame Seal Position
G10024385Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unscrew fastening screw between the sealing lip.
    Fig 2: Identifying Cowl Panel Frame Seal Mounting Point
    G10024386Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Separate bonded joint -1-  in the A-pillar area.
    Fig 3: Separating Bonded Joint
    G10024387Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 2.1. Check bonded joint and replace adhesive strips if necessary.
  3. Pull off seal -1-  all the way around.
    Fig 4: Removing Seal
    G10024388Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals