Installing Dashboard

Information 

• When installing the dashboard, make sure that no wires or plug connections are trapped  .

Information 

• Before securing the instrument panel, make sure that all wires and plug connections are routed correctly  .

1. Carefully guide the dashboard over the dashboard bracket and position it.
2. Installation is performed in reverse order to removal.
3. Screw in fastening screws and tighten to the specified tightening torque.

   Fastening screws securing dashboard at the sides: Tightening torque 3.2 Nm (2 ftlb.) 

   Fastening screws for dashboard: Tightening torque 13 Nm (9.5 ftlb.)