WM, 5X00IN24 Setting Self-Tapping Screws: Tools

Tool denomination	Type	Tool number	Image
FDS sockets	Vehicle-specific workshop equipment	> VAS 852 007A	Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Technical values 

Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
Threaded joint		Tightening torque	6 Nm (4.5 lb.ft)	+/-1 Nm (0.5 lb.ft)
Predrilled hole	Dimension X	Diameter	3.5 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Through-bore	Dimension Y	Diameter	7 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Threaded joint		Tightening torque	9.5 Nm (7 lb.ft)	+/-1 Nm (0.5 lb.ft)
Predrilled hole	Dimension X	Diameter	4.7 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Through-bore	Dimension Y	Diameter	8 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Screw	Screw in as far as head contact surface	Torque angle e	+ 90°
Pilot bore	Dimension X	Diameter	3.5 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Through-bore	Dimension Y	Diameter	7 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Screw	Screw in as far as head contact surface	Torque angle e	+ 90°
Pilot bore	Dimension X	Diameter	3.5 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry
Through-bore	Dimension Y	Diameter	7 mm
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Hole geometry