Welding Parameters For Pulling Punch Rivets
| Bolt | Welding time [ms] | Amperage rating [A] | Lift [mm] | Gas pre-flow time [ms] | Gas parameters [l/min] | Power terminal | Ground terminal | Polarity |
|---|---|---|---|---|---|---|---|---|
| Stainless-steel bolt, M6 | 32 | 650 | 1.0 | 1, 000 | 10 | Component | Gun | Polarity reversed |
| Stainless-steel bolt, M5 | 30 | 600 | 1.0 | 1, 000 | Component | Gun | Polarity reversed |
- 2
Weld the weld stud onto the rivet head of the punch rivet.
Welding on weld stud
- Pull out punch rivet at the welded-on weld stud using a hydraulic riveting tool > VAS 6790 - Compact booster
with tool attachment > VAS 6792/2 - Extension
. Refer to: TOOLS .
Pulling punch rivets