LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 5X - Body - General - BOXSTER & CAYMAN >> WM, 5X00IN20 Working With Body Structural Foam >> Working With Body Structural Foam >> Processing Conditions

Processing Conditions

During processing, the ambient and material temperature must be at least > Minimum temperature 15°C  and must not exceed a maximum temperature of > Maximum temperature 28°C  .

Higher processing temperatures reduce processing time.

> Processing time at 20°C 90 min 

> Processing time at 28°C 60 min 

scientia non olet · About LEMON Manuals