LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster Spyder >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 51 - Body Center, Roof, Frame - BOXSTER & CAYMAN >> WM 519319 Removing And Installing Cover For Center Underbody (All Models) >> Installing Cover For Center Underbody

Installing Cover For Center Underbody

  1. Installation is performed in reverse order to removal.
  2. Screw in and tighten fastening screws and nuts. Torque screwdriver Nr.89 Pos.5 

    Fastening screws securing underbody cover to body. Tightening torque 2.7 Nm (2 ftlb.) +/-0.2 Nm (+/-0.1 ftlb.) 

    Fastening nuts securing underbody cover to body. Tightening torque 2.7 Nm (2 ftlb.) +/-0.2 Nm (+/-0.1 ftlb.) 

scientia non olet · About LEMON Manuals