Installing Cover For Front Underbody

1. Installation is performed in reverse order to removal.
2. Tighten fastening screws -2-  and fastening nuts -3-  using a torque screwdriver Nr.89 Pos.5  .

Fastening screws securing underbody cover to body. Tightening torque 2.7 Nm (2 ftlb.) +/-0.2 Nm (+/-0.1 ftlb.) 

Fastening nuts securing underbody cover to body. Tightening torque 2.7 Nm (2 ftlb.) +/-0.2 Nm (+/-0.1 ftlb.)