Preparing Connection Areas For Installing B-Pillar Reinforcement

Information 

• Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive  .
• The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed  .
• Do not begin bonding work until all materials and tools necessary for later repair work are available  .

1. Straighten sealing surface and connection areas of the body.
2. De-burr connection areas and prepare for welding.
3. Prepare marked areas for welding and bonding.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.