Installing Cover For Front Backrest

Check fastening clamps -1- on the outside of the backrest shell and replace them if necessary.

Fig 1: Checking Fastening Clamps
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Check fastening clamps -1- close to the belt guide and replace them if necessary.

Fig 2: Checking Fastening Clamps
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

Only when replacing the cover.
Position cover -3- on the front of the padding -1- .
Align Velcro strip -2- on the cover with the Velcro fastener on the padding -1- and secure it -arrow- .

Fig 3: Joining Cover And Padding

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Position cover -1- and padding -2- on the backrest shell -3- and straighten it -arrows- .

Fig 4: Securing Cover (Belt Guide)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Press joint on cover -1- into the backrest shell -2- near the top of the headrest -arrows- .

Fig 5: Securing Cover Into Backrest Shell
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Press joint on cover -1- into the fastening clamps -2- near the belt strap guide -arrows- .

Fig 6: Securing Cover Into Fastening Clamps
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Press cover -1- into the backrest shell -2- at the sides -arrows- .

Fig 7: Securing Cover Into Backrest Shell
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Align cover -1- with the side bolsters.

Fig 8: Pressing Velcro Fasteners
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

Make sure the Velcro fasteners join cleanly.
Press on Velcro fasteners -2- and -3- (-arrows- ).
Press joint on cover -1- into the backrest shell -2- at the sides using a plastic wedge and secure by tapping gently (with a plastic hammer).

Fig 9: Securing Cover Into Backrest Shell
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove adhesive tape -2- from the backrest shell -1- .

Fig 10: Masking Backrest Shell
Courtesy of PORSCHE CARS NORTH AMERICA, INC.