Removing Suction Fan For Backrest Surface

Swivel lumbar support -1- up -A- and secure it.

Fig 1: Folding Lumbar Support Out Of Way
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Cut tie-wrap -1- and remove insulation around the electric plug connection for the suction fan for the backrest surface -2- . Unplug electric plug connection on the suction fan for the backrest surface -2- (-A- ).

Fig 2: Disconnecting Plug Connection
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Unscrew the three fastening screws -2- , guide the suction fan for the backrest surface -1- upwards -A- and remove it.

Fig 3: Removing Suction Fan
Courtesy of PORSCHE CARS NORTH AMERICA, INC.