LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (40 Front Wheel Suspension, Drive Shafts -- 911 CARRERA (991)) >> WM 405719 Removing And Installing Front Wheel Bearing (CARRERA GTS, CARR. CABRIO, CARRERA 4 GTS, Turbo S, TARGA 4 GTS, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO, Gt3, Gt3 RS) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front wheel. → 440519 REMOVE AND INSTALL THE WHEEL AND CENTRAL BOLT .
  2. Pull the wheel bolt lock -1-  out of the wheel hub -2-  .
    Fig 1: Pulling Wheel Bolt Lock
    G09992854Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Unscrew the hexagon nut -1-  securing the wheel hub to the tension bolt using the socket wrench 9471  . Another person is needed in order to actuate the service brake.
    Fig 2: Identifying Wheel Hub Nut
    G09992855Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Remove front brake disc.

    On vehicles with PCCB: → 465119 REMOVING AND INSTALLING FRONT PCCB BRAKE DISC .

    On vehicles with steel brakes: → 465019 REMOVING AND INSTALLING FRONT BRAKE DISC .

scientia non olet · About LEMON Manuals