LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (42 - Rear Wheel Suspension, Drive Shafts -- CARRERA (997)) >> WM 427119 Removing And Installing Rear Spring Strut (Except 911 "Sport Classic", 911 CARR. GTS Coupe, 911 CARRERA Black Edition, 911 CARR. Coupe "Edition Style", 911 CARR. GTS CABRIO, 911 CARRERA CABRIO Black Edition, 911 CARR. CABRIO "Edition Style", 911 Turbo S Coupe, 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt2 RS, 911 Gt3 RS 4.0) >> Removing And Installing Spring Strut - Subsequent Work

Removing And Installing Spring Strut - Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

If assembly work was performed or parts replaced that affect the vehicle height, the suspension must be aligned (check and adjust wheel alignment values) → 449503 PERFORMING FRONT AND REAR SUSPENSION ALIGNMENT .

  1. Fit rear wheel → INSTALLING WHEEL .
  2. Carry out suspension alignment, if necessary.
scientia non olet · About LEMON Manuals