LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 163 (42 - Rear Wheel Suspension, Drive Shafts -- CARRERA (997)) >> WM 425819 Removing And Installing Rear Wheel Bearing (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove rear wheel bearing housing (wheel carrier) → Removing Wheel Bearing Housing   .
  2. Remove brake disc, parking-brake shoes, brake cover plate and speed sensor on wheel bearing housing (wheel carrier).
scientia non olet · About LEMON Manuals