LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (46 - Brakes - Brake Mechanics -- CARRERA (997)) >> WM 465119 Removing And Installing Front PCCB Brake Disc (All Models) >> Subsequent Work >> Bedding In The Brake Pads

Bedding In The Brake Pads

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

New brake pads require a slightly longer bedding-in period for PCCB brake discs than cast iron brake discs.

In general, the following applies: New brake pads must be worn in (bedding-in period), their optimum braking effect is therefore not reached until after a few hundred kilometers. The slightly reduced braking effect must be compensated for by increased pressure on the brake pedal. The same also applies after a brake disc change.



New brake pads require a slightly longer bedding-in period for PCCB brake discs than cast iron brake discs.

In general, the following applies: New brake pads must be worn in (bedding-in period), their optimum braking effect is therefore not reached until after a few hundred kilometers. The slightly reduced braking effect must be compensated for by increased pressure on the brake pedal. The same also applies after a brake disc change.

scientia non olet · About LEMON Manuals