Checking Brake Discs For Minimum Thickness
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Information
- For perforated brake discs, the minimum thickness -X- must always be measured on the inner or outer friction surface track -arrows-.
- Wear limit: The minimum brake disc thickness is stamped on the brake-disc chamber (e.g. Min. Th. 37.7 mm).
- Measure the brake thickness -x- with a suitable micrometer screw or a brake disc gauge around the inner or outer friction surface tracks -arrows- .
Information
- For perforated brake discs, the minimum thickness -X- must always be measured on the inner or outer friction surface track -arrows-.
- Wear limit: The minimum brake disc thickness is stamped on the brake-disc chamber (e.g. Min. Th. 37.7 mm).
- Measure the brake thickness -x- with a suitable micrometer screw or a brake disc gauge around the inner or outer friction surface tracks -arrows- .