Tightening Torques For Brake Pedal/Pedal Bearing Axle
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brake pedal to brake pushrod (M8 x 1 threaded bolt) | Always replace threaded bolt following removal | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Brake pushrod to brake booster (collar nut M6) | Tightening torque | 10 Nm (7.5 ftlb.) | |||
| Brake pushrod to adjusting piece (lock nut) M12 x 1.5 | Tightening torque | 30 Nm (22 ftlb.) | |||
| Pedal bearing axle in pedal block | Tightening torque | 8 to 10 Nm (6 to 7.5 ftlb.) | |||
| Locknut pedal bearing axle to pedal block right M8 | Tightening torque | 10 Nm (7.5 ftlb.) | |||
| Locknut pedal bearing axle to pedal block left M14 | Tightening torque | 46 Nm (34 ftlb.) |