Removing Rear-Axle Cross Member

Fig 1: Locating Rear-Axle Cross Member Position

G10023532

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unscrew fastening nut -1- and pull out fastening screw -2- .
Set angle sensor with bracket -3- and connected electric line aside.

Repeat the procedure on the other side of the vehicle.

Fig 2: Removing Rear-Axle Cross Member
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove rear-axle cross member -4- in a downward direction.