LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster S, Standard Trans >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> 42 - Rear Wheel Suspension, Drive Shafts -- (981) BOXSTER/CAYMAN >> WM 427119 Removing And Installing Rear Spring Strut (CAYMAN "Black/Style Edition", BOXSTER "Black/Style Edition", CAYMAN Gt4) >> Preliminary Work

Preliminary Work

  1. Loosen axle nut (securing drive shaft to wheel bearing housing). Also apply the brake (2nd mechanic required) while the vehicle is stationary on the ground.
  2. Raise the vehicle.

    → 4X00IN LIFTING THE VEHICLE - section on "Lifting and lowering"

  3. Remove rear wheel.

    → 440519 REMOVING AND INSTALLING WHEEL .

    For vehicles with PCCB brake discs, use assembly aids (two assembly pins).

  4. Remove rear covers -1-  . → 705319 REMOVING AND INSTALLING REAR COVER
    Fig 1: Identifying Rear Cover
    G10023614Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals