LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 289 (10 - Engine - Crankcase, Suspension -- 911 CARRERA (991)) >> WM 101802 Checking Pressure Loss Of Cylinders (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3 RS) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install spark plugs. → Installing Spark Plugs
  2. Fit rear wheels. → Installing Wheel With Central Bolt


  1. Fit spark plugs.

    → Installing Spark Plugs .

  2. Install ignition coil.

    → Installing Ignition Coils .

  3. Install upper part of heat shield.

    → Installing Heat Shield .

  4. Install heat shield on the engine carrier.

    → 261419 REMOVING AND INSTALLING HEAT SHIELD ON ENGINE CARRIER .

  5. Install front silencer.

    → Installing Front Silencer .

  6. Mount rear wheels.

    Socket-wrench insert P300  should be used.

    → Installing Wheel .

scientia non olet · About LEMON Manuals