WM 407719 Removing And Installing Front Anti-Roll Bar (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition"): Information

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

To remove and install the anti-roll bar, lower the front-axle cross member -2- slightly at the front (approx. 50 to 60 mm). This is necessary in order to make room in this area.

Fig 1: Identifying Front-Axle Cross Member

Courtesy of PORSCHE CARS NORTH AMERICA, INC.