Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Anti-roll bar clamp to rear-axle cross member (conventional and PDCC anti-roll bar) | Hexagon-head bolt, M10 | Tightening torque | 65 Nm (48 ftlb.) | ||
| Connecting link (conventional suspension/stabilizer) to anti-roll bar | Collar nut, M10/always use new collar nut following removal | Initial tightening | 40 Nm (30 ftlb.) | ||
| Connecting link (conventional suspension/stabilizer) to anti-roll bar | Collar nut, M10/always use new collar nut following removal | Final tightening | +30° |