LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (46 - Brakes - Brake Mechanics -- CARRERA (997)) >> WM 463820 Removing And Installing Rear Brake Pads (Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER", Gt3, Gt3 RS, Gt3 RS 4.0) >> Installing Rear Disc Brake Pads >> Bedding In The Brake Pads

Bedding In The Brake Pads

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

New brake pads require a bedding-in period of approx. 200 km (125 miles). Only then do they achieve their maximum braking effect. The slightly reduced braking effect must be compensated for by increased pressure on the brake pedal. The same also applies after a brake disc change.