LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (94 - Lights, Lamps, Switches, Exterior -- 987-BOXSTER-CAYMAN) >> WM 947119 Removing And Installing Auxiliary Headlight (Except CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, BOXSTER S Black Edition, CAYMAN R) >> Installing Auxiliary Headlight

Installing Auxiliary Headlight

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Auxiliary headlight is inserted into the front apron at a tilt
  • Risk of damage to paintwork on front spoiler

→ Carefully insert auxiliary headlight into the guides on the front apron.

→ Make sure that the guide on the housing is inserted into the guide on the front apron.

  1. Make sure that the ventilation connection piece is correctly seated on the auxiliary headlamp.
  2. Connect the electric connectors -1, 2-  until they are felt to engage.
    Fig 1: Connecting Electric Connectors
    G09593567Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Push auxiliary headlight into front apron, ensuring that the locking tab -A-  is engaged in the front apron.
    Fig 2: Engaging Locking Tab In Front Apron
    G09593568Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Push auxiliary headlight on locking tab side -A-  upwards and secure using both fastening screws -1-  .
    Fig 3: Screwing Down Auxiliary Headlight
    G09593569Courtesy of PORSCHE CARS NORTH AMERICA, INC.