LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> 42 - Rear Wheel Suspension, Drive Shafts -- (981) BOXSTER/CAYMAN >> WM 429019 Removing And Installing Rear Anti-Roll Bar (All Models) >> Removing And Installing Rear Anti-Roll Bar >> Removing Rear Anti-Roll Bar

Removing Rear Anti-Roll Bar

  1. Loosen anti-roll bar from the connecting link (suspension/stabilizer) by unscrewing the nut -1-  .

    Counter at the internal Torx screw on the connecting link while doing this.

  2. Loosen anti-roll bar from the rear-axle side section by unscrewing the two fastening screws -2-  .
    Fig 1: Identifying Anti-Roll Bar Mounting With Screws
    G10023644Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Repeat the procedure on the other side of the vehicle.
  4. Remove anti-roll bar by pulling it sideways.
scientia non olet · About LEMON Manuals