LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 53 - Body Rear - BOXSTER & CAYMAN (981) >> WM 530555 Replacing Rear Closing Panel (CAYMAN "Black/Style Edition", BOXSTER "Black/Style Edition", CAYMAN Gt4) >> Preparing Rear Closing Panel For Installation

Preparing Rear Closing Panel For Installation

  1. Fit closing panel and secure it to the body.
    1. 1.1. Drill bores for the rivets through the existing holes. → Diameter: 6.6 mm 
  2. Remove closing panel.
  3. Countersink bores for installing countersunk rivets. Countersink Nr.202 -area A- 
    G10023304Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Prepare connection areas for bonding.
scientia non olet · About LEMON Manuals