Removing Seal For Sliding Roof

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Seal For Sliding Roof

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Detach the seal -1- all the way around.

Fig 2: Detaching Seal
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove adhesive residue.
1. 2.1. Remove adhesive residue all the way around.
2. 2.2. Clean bonding surfaces -1- with isopropyl.
  
  Fig 3: Removing Adhesive Residue
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Apply primer.
1. 3.1. Apply primer to the bonding surface -1- and leave it to dry off.
  
  Fig 4: Applying Primer To Bonding Surface
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Location	Description	Type	Basic Value	Tolerance 1	Tolerance 2
Primer	Drying Time	Time	10 Minutes