Bumpers, Front Apron

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Location	Description	Type	Basic value	Tolerance 1
Fastenings screw securing bumper to bodyshell	Item 2	Tightening torque	23 Nm (17 ftlb.)	+/-2 Nm (+/- 1.5 ftlb.)
Removing front bumper
Fastening screw for front spoiler	Item 2	Tightening torque	2.7 Nm (2 ftlb.)	+/-0.2 Nm (+/- 0.1 ftlb.)
Loosening front spoiler
Fastening screw securing front apron to body, top	Item 2	Tightening torque	3.2 Nm (2 ftlb.)	+/-0.6 Nm (+/- 0.5 ftlb.)
Loosening front apron at the top
Fastening screw securing front apron to body, at the sides	Item 2	Tightening torque	3.2 Nm (2 ftlb.)	+/-0.6 Nm (+/- 0.5 ftlb.)
Loosening front apron at the sides
Fastening screw securing front apron to body, bottom	Item 2	Tightening torque	3.2 Nm (2 ftlb.)	+/-0.6 Nm (+/- 0.5 ftlb.)
Loosening front apron at the bottom
Fastening screws for front air grille		Tightening torque	+2 Nm (+1.5 ftlb.)
Installation position of front air grille (top)
Fastening screws for front spoiler (at the left and right)		Tightening torque	+2 Nm (+1.5 ftlb.)
Mounting for front spoiler (left and right)
Fastening screws for radiator grille (left and right)		Tightening torque	+2 Nm (+1.5 ftlb.)
Drilling out rivets
Fastening screws for side retaining strip	Item 2	Tightening torque	3.2 Nm (2 ftlb.)	+/-0.6 Nm (+/- 0.5 ftlb.)
Removing retaining strip
Fastening nut securing front retaining strip to body	Item 2	Tightening torque	10 Nm (7.5 ftlb.)
Removing front retaining strip
Pedestrian protection bracket		Tightening torque	23 Nm (17 ftlb.)	+/-2 Nm (+/- 1.5 ftlb.)
Pedestrian protection bracket

Front spoiler

2 - Screw → Contact force: +3.2 Nm (+2 ftlb.)+10 %-15 %

Fig 1: Fitting Front Spoiler
Courtesy of PORSCHE CARS NORTH AMERICA, INC.