LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 304 (70 - Linings, Insulation -- 911 CARRERA (991)) >> WM 708119 Removing And Installing Trim Panel For Roll-Over Bar (TARGA 4, TARGA 4S, TARGA 4 GTS) >> Removing Trim Panel For Roll-Over Bar >> Installing Trim Panel For Roll-Over Bar

Installing Trim Panel For Roll-Over Bar

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Check that the fixing clips are not bent or broken.

Replace missing or damaged fixing clips with new ones.

Make sure that all fastening clips have engaged correctly.

Check that they are fitted correctly.

  1. Installation is performed in reverse order to removal.
scientia non olet · About LEMON Manuals