LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster GTS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 284 (37 Automatic Transmission - Actuator, Housing -- 911 CARRERA (991)) >> WM 373019 Removing And Installing PDK Transmission Control Unit (Gt3, Gt3 RS) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. If you are replacing the PDK transmission control unit, the values and coding must be read out using PIWIS Tester II 9818  before removing the faulty PDK transmission control unit. → 373055 REPLACING PDK TRANSMISSION CONTROL UNIT 
  2. Disconnect battery ground strap. → 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY
  3. Remove rear seat cushions. → 745719 REMOVING AND INSTALLING REAR SEAT CUSHION
  4. Remove trim panel for seat well. → 702919 REMOVING AND INSTALLING TRIM PANEL FOR SEAT WELL
  5. Press the carpet at the rear right aside in the heel plate area.
scientia non olet · About LEMON Manuals