Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Heat up wheel bearing housing | For removing and installing the wheel bearing | Temperature | 100°C | ||
| Cover for wheel bearing to wheel bearing housing, M8 |
IMPORTANT:
Do not grease threaded connections in Dacromet finish (aluminum colored).
|
Tightening torque | 37 Nm (27 ftlb.) | ||
| Brake cover plate to wheel bearing housing, M6 | Please note: Do not grease threaded connections in Dacromet finish - aluminum color. | Tightening torque | 10 Nm (7.5 ftlb.) |
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Heat up wheel bearing housing | For removing and installing the wheel bearing | Temperature | 100°C | ||
| Cover for wheel bearing to wheel bearing housing, M8 |
IMPORTANT:
Do not grease threaded connections in Dacromet finish (aluminum colored).
|
Tightening torque | 37 Nm (27 ftlb.) | ||
| Brake cover plate to wheel bearing housing, M6 | Please note: Do not grease threaded connections in Dacromet finish - aluminum color. | Tightening torque | 10 Nm (7.5 ftlb.) |