Installing Tilt Sensor Control Unit

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.

Push plug onto tilt sensor control unit until it is felt to engage.

Fig 1: Installing Tilt Sensor Control Unit
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Check sheetmetal nuts for deformation, replacing if necessary. Push the two sheetmetal nuts -2- onto the tilt sensor control unit.
Position tilt sensor control unit -1- and secure with both fastening nuts. → Tightening torque: 3 ftlb.

Fig 2: Tightening Fastening Screws For Tilt Sensor Control Unit

Courtesy of PORSCHE CARS NORTH AMERICA, INC.