LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Boxster GTS, Automatic DCT Trans >> Repair and Diagnosis >> Suspension >> Rear Suspension >> 4X - Chassis - General -- (981) BOXSTER/CAYMAN >> WM 4X00IN Adjustment Values For Suspension Alignment (All Models) >> Adjustment Values For Suspension Alignment >> Values Valid For Cayman GT4

Values Valid For Cayman GT4

Vehicle height worldwide Cayman GT4
Front-axle height (control values)
20-inch wheels 109 +2/-0 mm
Front-axle height:  Measure from road contact surface to measuring point on cross member/bulkhead -arrows-  .
Fig 1: Locating Front-Axle Height Measuring Point
G10026419Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Vehicle height worldwide Cayman GT4
Rear-axle height (control values)
20-inch wheels 130 +2/-0 mm
Rear-axle height:  Measure from road contact surface to lower edge of diagonal brace (between the ribs) at wishbone fastening point -arrow-  .
Permitted transverse inclination of the vehicle: Max. difference in height, left to right = 5 mm
Permitted longitudinal inclination of the vehicle: Max. total deviations at front and rear = 10 mm
Max. wheel-load difference, right to left, on front axle 10 kg and on rear axle 15 kg. Try for max. 5 kg on the front axle and max. 10 kg on the rear axle.
Fig 2: Locating Rear-Axle Height Measuring Point
G10026420Courtesy of PORSCHE CARS NORTH AMERICA, INC.