Installing Seal For Roof Assembly

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

Immediately before sticking on, wash off the areas on which you intend to stick the seal using isopropyl to ensure that all traces of silicone, grease and oil are completely removed.

Position the seal.
The lug -1- of the protective film must be facing outwards.
Pull off protective film -1- parallel to the body.

Fig 1: Pulling Off Protective Film
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Check that the seal is fitted correctly.
Press on the seal from the roof side using a plastic wedge.