Installing Air Deflector For Sliding Roof

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fit the air deflector springs in the air deflector bracket.
Insert the air deflector bracket together with the air deflector springs into the frame and screw down securely. → Tightening torque: 2 Nm (1.5 ft. lbs.)
Information

Coat the air deflector piping and insertion groove with soapy water to facilitate fitting.
Fit air deflector piping.
1. 3.1. Centre the marking -1- on the air deflector net in the groove -arrow- .
  Information
  
  When fitting the air deflector net in the groove, make sure that it is fitted without folds.
2. 3.2. Fit the air deflector piping in the groove, starting at the center and moving outwards.
  
  Fig 1: Installing Air Deflector Piping
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install air deflector cable.
1. 4.1. Tighten the fastening screw -1- for the air deflector cable in the air deflector -2- . → Tightening torque: 0.5 Nm (0.3 ft. lbs.) 0.7 Nm (0.5 ft. lbs.)
  
  Fig 2: Securing Air Deflector Cable
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.