Retaining Strips

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fastenting screw on front retaining strip

→ Tightening torque: 9.7 Nm (7.5 ftlb.)

Fig 1: Installing Front Retaining Strip

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

→ Tightening torque: 9.7 Nm (7.5 ftlb.)

Fig 2: Installing Lower Side Retaining Strip

Courtesy of PORSCHE CARS NORTH AMERICA, INC.